Location:
Search - display ir code
Search list
Description: 红外线遥控器读码软件，显示红外线波型，读取并保存码
IR Remote Control Unit Code Read System
产品详细描述：
能够像显示器一样显示红外线码的波型
可以读多达１５０种格式的红外线码
显示红外线码的时间非常准确，误差只有几个微秒。
具有错误检测功能
保存红外线码功能
自动识别码的格式
比较样机与所写的新软件的遥控器码的异同
具体情况请访问本网站：http://www.crzman.com/IR_Reader.htm
Display the Infrared wave on the software like oscillograph.
Can read more than 150 kinds of infrared code format
Display the Infrared time and the tolerance no more than many us.
Have error detect function
Save Infrared code function
Auto identify code s format
Compare the code from sample and new Remote Control Unit code)
Detail instance please visit address: http://www.crzman.com/IR_Reader.htm
-infrared remote control code reading software, and display infrared wave, Read and save code IR Remote Control Unit Code Read System Product description : like infra-red monitors showed that the wave-type codes can be read up to 150 infrared codes format shows infrared codes Time is very accurate, error only a few microseconds. Error detection function is to preserve the functional infrared code automatic identification code format compared with the prototype of the new software written by remote control code The similarities and differences between the specific situation, please visit the website : http : / / www.crzman.com / Display the IR_Reader.htm Infrared wave on the software like oscillograp h. Can read more than 150 kinds of infrared code f ormat Display the Infrared time and the t
Platform: |
Size: 563567 |
Author: 刘友根 |
Hits:
Description: 内容：
*红外测试程序，用单片机通过发射管发射38K的调制频率码，由一体化接收并解码由发光管显示。
*正常情况下，由于反射和高灵敏度接收，LED4（P1.3)一直闪烁，可以用黑色纸片完全遮挡接收头使
*之不能接收到发射管的信号，这是LED4熄灭。说明功能性正常
-Content:* IR test program, launched with the microcontroller through the launch tube of the modulation frequency of 38K code, by the integration to receive and decode from the LED display.* Under normal circumstances, due to reflection and high-sensitivity receiver, LED4 (P1.3) has been flickering, you can completely block the black pieces of paper to make* that they are not receiving the first emission control signal is received, it is LED4 out. Note the normal functional
Platform: |
Size: 9216 |
Author: hahammc |
Hits:
Description: 通过L298n驱动电机，红外简易智能小车寻迹，并带有显示时间的源代码程序。对于电子爱好者有很大的帮助！-By L298n drive motor, IR Simple Smart car tracing, and source code with the display time program. For electronic enthusiasts a great help!
Platform: |
Size: 2048 |
Author: 李立 |
Hits:
Description: 红外一体化接收头接收到红外遥控发射器所发射的信号，并将此信号进行整形和反相送入单片
机 P3.2 端口。经过软件译码，将译码结果（按键代码）送数码管显示。-Integrated IR remote control infrared receiver receives the signals emitted by the transmitter and the signal shaping and the RP into the monolithic
Machine P3.2 port. Through software decoding, the decoding results (key code) to send digital display.
Platform: |
Size: 27648 |
Author: huang |
Hits:
Description: 红外一体化接收头接收到红外遥控发射器所发射的信号，并将此信号进行整形和反相送入单片
机 P3.2 端口。经过软件译码，将译码结果（按键代码）送数码管显示。-Integrated IR remote control infrared receiver receives the signals emitted by the transmitter and the signal shaping and the RP into the monolithic
Machine P3.2 port. Through software decoding, the decoding results (key code) to send digital display.
Platform: |
Size: 1024 |
Author: huang |
Hits:
Description: 红外解码至1062LCD显示 内含程序和代码-IR decoder to 1062LCD display contains procedures and code
Platform: |
Size: 43008 |
Author: su |
Hits:
Description: 这个程序的功能是：通过红外解码，实现对其他事物的无线控制。其主要通过红外解码，把所解出的码通过数码管显示出来。-The function of this program are: IR decoding, and wireless control of the other things. Mainly through the IR decoding, solved the code through digital tube display.
Platform: |
Size: 24576 |
Author: shitou |
Hits:
Description: 1、LCD1602 显示红外遥控器键值编码。
2、使用红外遥控器对步进电机的转动方向和速度进行控制。
定义5个有效按键：
UP 键按下步进电机正转，显示 >>>> 。
DOWM 键按下步进电机反转，显示 <<<< 。
K1 键按下步进电机停止转动，显示 STOP 。
＋ 键减少延时时间，步进电机加速。
－ 键增加延时时间，步进电机减速。-1, LCD1602 display infrared remote control key code.
2, the use of infrared remote control the stepper motor rotation direction and speed control.
Define 5 effective key:
UP key press the stepping motor is turn, display > > > >.
DOWM key press stepping motor reversal, display < < < <.
K1 key press stepping motor STOP, the display STOP.
+ key to reduce delay time, stepping motor speed.
- key increase delay time, stepping motor speed.
Platform: |
Size: 31744 |
Author: 小宁 |
Hits:
Description: that is the microcontroller atiny2313 code for ir display
Platform: |
Size: 20480 |
Author: darkntedious |
Hits:
Description: 基于51单片机的红外解密程序，可以将解析出来的红外编码显示在LCD1602上-51 MCU decryption program based on infrared, infrared code can be parsed in the LCD1602 display
Platform: |
Size: 7168 |
Author: iuip |
Hits:
Description: 1. 单片机上电后1602显示Red Control IR-CODE: 2. 按遥控器上的“>>”和"<<"可以选择要作的实验（本例程只开通tx-led ? 3. 当1602上显示到tx-led按下遥控器上的“MODE”键可进入led控制4. 进入后按下“>||”键即可开始，按下“>>”和"<<"客控制右移和左移5. 按下遥控器上“静音”按钮客控制有声和无声6. 按下“EQ”键可回到主界面-After device power 1602 to display Red Control IR-CODE: press on the remote control " > > " and " < < " can choose to make the experiment (this routine only opened tx-LED? 1602 displayed on the TX-led press the " MODE" button on the remote control to enter led control after entering the press " > | |" key to start, press the " > > " and " < < " Right off control shift and left 5. " mute" button on the remote control is pressed off control sound and silent 6 Press the " EQ" button to return to the main interface
Platform: |
Size: 25600 |
Author: sy |
Hits:
Description: *红外测试程序，用单片机通过发射管发射38K的调制频率码，由一体化接收并解码由发光管显示。
*正常情况下，由于反射和高灵敏度接收，LED4（P1.3)一直闪烁，可以用黑色纸片完全遮挡接收头使
*之不能接收到发射管的信号，这是LED4熄灭。说明功能性正常-* The IR test program, with the microcontroller through launch tube 38K code modulation frequency integrated receiver and decoder from the LED display.
* Under normal circumstances, due to reflection and high-sensitivity receiver, LED4 (P1.3) has been flashing, can completely block the receiving head with a black piece of paper
* Can not receive a signal to the launch tube, which is LED4 off. The normal of the functional
Platform: |
Size: 1024 |
Author: 夏军旗 |
Hits:
Description: 21键红外解码,经典示例,可以当测试程序使用.按相应的按键,LCD1602上将显示该键码的值,还有里面还附有建码表.-21-key IR decoding, the classic example, when the test program can use by pressing the corresponding button, LCD1602 will display the key code value, as well as building codes which also accompanied by tables.
Platform: |
Size: 51200 |
Author: 云杰 |
Hits:
Description: 这是一个单片控制红外接收的代码，能够显示用户编码与键数据码-This is a monolithic control infrared receiver of the code, the user can display the data code encoding and key
Platform: |
Size: 1024 |
Author: 李杰 |
Hits:
Description: 红外接收程序。适用于市场上用量最大的HT6121/6122及其兼容IC的编码。-IR receiver. Applicable largest amount of HT6121/6122 and compatible IC encoding in the market.
For user code and User_code define different remote control, the program sends the user code together from the serial output.
Using simulated serial port monitor display code, display the ASCII code and Chinese.
The program is based on the state machine receives the way, take up very little CPU time
Platform: |
Size: 10240 |
Author: myname |
Hits:
Description: 红外遥控器Verilog代码实现，并在数码管上显示，包含详细代码+资料-Infrared remote control Verilog code, and on the digital display, it contains detailed information on the code+
Platform: |
Size: 2258944 |
Author: 孤风 |
Hits:
Description: IR红外遥控,1、按键控制led发光二极管,2、遥控-键码值液晶显示-IR infrared remote control, 1, button control LED light-emitting diode, 2, remote control- key code value LCD display
Platform: |
Size: 58368 |
Author: DFVG |
Hits: